Specification Summary:
Bolton Gate Company, the acknowledged leader in the field of rolling fire door technology, are pleased to offer the Fibreroll range of fire rated curtains.
These fire curtains are specifically designed to provide fire compartmentation and a protected means of escape all within a compact, aesthetically pleasing yet robust and reliable system.
Utilising a fully tested woven glass fabric with stainless steel wire reinforcement, the Fibreroll E120 Rolling Fire Curtain provides not only up to two-hour fire integrity between fire compartments but also a reduction in radiated heat to such a large extent that it meets the requirements for a rating of EW60.
Resistance to Fire: E30, E60 or E120 classifications
Including Rigid and Flexible Structures
Radiated Heat: EW60
Reduction of 15kW/m² to EW60 classification
Fire: Tested to EN1634-1 all in accordance with EN13501- 2, EN15269.
Any internal application where fire compartmentation is required but is ideally suited for:
Retail Malls, Offices, Receptions / Foyers, Lift Lobbies / Lift Doors, Open-plan Private Residencies.
Electric operation is by means of a tubular motor suitable for connection to a 230-volt nominal single-phase supply with gravity failsafe closure in a fire condition.
A control panel is provided with the facility for connection of a normally closed volt free contact from the Client’s fire alarm system . A battery is included to prevent unwanted closing of the curtain in case of power failure.
The curtain will automatically descend upon receipt of the fire signal and retract once removed.
If the curtain system is to be used on an escape route, only local heat detection can be used. This can be accommodated by our operating controls.
Specially reinforced and coated fibreglass material which is designed to withstand temperatures more than 1000 degrees C.
Dependent upon rating, either a steel bottom rail is attached to the curtain or a loop of curtain is fitted with an integrated weight bar. Both provide rigidity and act as a weight to assist in closure.
Manufactured from galvanised steel and formed into a slimline profile which is prepared for bolting to the opening structure.
The roller comprises a suitable diameter steel tube in which the tubular motor is fitted at one end and steel shafts / discs at the other.
Galvanised steel endplates are provided with integrated angles to simplify installation.
The roller is covered by a galvanized steel casing which also acts as a fire seal at the head.
The curtain is supplied in a neutral grey colour with the side guides, bottom rail, and coil casing all supplied in a standard galvanised finish.
30000mm wide x 8000mm high – depending on rating required.
Curtain 0.78Kg / m² approx. Barrel / Casing 30Kg / m approx.
