Curtain
Constructed from Grade 304 stainless steel tubes and links to give an attractive parallel mesh of 500 x 85mm. Continuous steel inner tubes running horizontally provide strength against bowing and are capped/pinned to prevent lateral movement. The bottom rail is formed from two angles polyester powder coated silver.

Guides
Formed from grade 304 stainless steel into an attractive and compact "c" section with the rebates preventing the curtain from deflecting out of the guides. Suitable guide angles are provided for bolting to the opening structure.

Roller
Fabricated from steel tube of sufficient diameter and wall thickness to prevent deflection.

Endplates
Fabricated from mild steel with support angles for fixing to the opening structure. Bearings are fitted at either end to support the roller shaft.

ELECTRICAL OPERATION
The grille is powered by a geared motor which is mounted directly onto the endplate. Adjustable limit switches are provided and a facility for manual operation in the event of power failure. Each grille is provided with an open/close/stop push button starter.

MAXIMUM SIZES
10 metres wide x 5 metres high (maximum area: 40m2).

OPTIONS

• Tubular Motors
• Heavy duty motors for higher usage
• Key switches
• Remote control
• Safety photocells
• Coil casings and fascias
• Solenoid locking shootbolts

WEIGHT
Approximately 25 kgs per m².

BENEFITS

• High quality aesthetic appearance
• Excellent rust resisting properties
• Low maintenance
• Attractive parallel mesh design